S12OC UK Forum

S12OC UK Forum (http://nissansilvia.co.uk//index.php)
-   S12 Discussion (http://nissansilvia.co.uk//forumdisplay.php?f=3)
-   -   up date (http://nissansilvia.co.uk//showthread.php?t=1310)

adzs12 04-11-2006 21:52

Il be suprised if it is the ecu but fingers crossed for ya mate;)

jakezx 06-11-2006 19:07

i have tryed two ecu's but still no luck. i have had the spark plugs out seems that there is no fuel coming through to them. so i think may be fuel pump but the ecu says every thing is fine:confused: think may have to ring a garge as need the car back on the road

datdrift 06-11-2006 20:59

i'm sure last time i was round i could smell/hear the fuel coming thru into the engine bay, so maybe its the injectors? ive got a few you could try....

adzs12 06-11-2006 23:54

Quote:

Originally Posted by jakezx
i have tryed two ecu's but still no luck. i have had the spark plugs out seems that there is no fuel coming through to them. so i think may be fuel pump but the ecu says every thing is fine:confused: think may have to ring a garge as need the car back on the road

Mate this is starting to ring bells, i had a very similar problem if not the same in the summer. Check all the wires going into the connection blocks down by your afm as i had to replace part of the ecu loom as i found one wire " white if im not mistaken" that had corroded and had broke off which was causing the injectors not to fire.

smoker 07-11-2006 01:48

surely if the injectors are working you would hear them 'clicking' and you can check the pump is working by disconnecting the hose at the fuel filter and letting it run out into a bucket with the ignition on. I think you have to crank the engine with the fuel pump fuse out to relieve the pressure..i didn't and got covered in petrol which is not nice

adzs12 07-11-2006 02:02

Sounds so much like what happened to mine i would be totally lost if its not what i suspect, check them wires and plugs mate;)

kennyboy 07-11-2006 08:13

Wire down near the afm
 
I agree with Adz on this one , i know i dont Say much lol !! but when i we were about to change my ecu and everything over there was a problem with the white or white and black wire being perished before we even started.

Worth a wiggle of the wire as your trying to start it , or strip the loom back for a good look at it .

Good luck with it .:)

jakezx 11-11-2006 18:59

dont worry and thanks for all the help i have had it fixed it was to do with the spark plugs 2 where not givin a strong enough spark and ht leads damaged but it is running now :D the mobile mech did not have a clue what he was doing o well runnig aweet again

adzs12 11-11-2006 19:06

None of them stupid mobile mechanics know what there doing half the time especially when it comes to these, i remember when pukka had one out and he was a complete burk, we fixed it in the end anyway so he kinda wasted some money there but we was baffled at the time and wasnt as experienced as we are now;)


All times are GMT. The time now is 21:52.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.