is this intercooler ok
 

Perfect, its what i have

Looks a bit wuss with those crimped on end tanks,what hp are these good for.

looking at the design of the end tanks, they will not flow good, they need to curve towards the core,they will hit the tank, then have to turn, then the same on the other side.it would be a good basic upgrade.

iv used this intercooler on standard turbo @ 15psi + other mods it made 199.8bhp

I use a similar intercooler on my det with a t3 at 15psi and its great, it doesnt create lag or get heat soaked. Mine is the one from a saab.
I will probably stick with it when i fit shauns t34. I still hope to run that at a mere 17psi to aid mechanical longivity

that tubby will run 32psi, don't be:ghey and wind the boost up;) .

You only ran 17psi at Rockingham.Are you :ghey

hehe. Id need a remap for anything higher shaun and a paddle clutch. Id be quite content with 260-300hp without spending out any further.

nahh mate i ran 23psi on it when it did the 5.4 to 60 mph and have ran 26 psi on the road whilst mapping;) as soon as the new intercooler is fitted i'll be having it mapped at 30-32 psi.:D

Dont damage it :(

it will only have a couple of runs and i was told that it was under warrenty at that psi.so dont worry, you can inspect it b4 you buy it, i'll take you out in the car b4 it comes off.its only done about 6 k.

Sounds good to me. I look forward to seeing what result it puts out. Ive had so many turbos over the years that havnt lasted very long due to the abuse ive given them im hoping that the next one i get from you to actually last me. :)