Adjustable anti roll bars
 

http://www.whiteline.com.au/

Part no's BNF37Z & BNR34Z

Forget the roll bars, check out the funnies page on the home whiteline hompage, its superb:D

awesome!!!! best handling mod bar none on an s13, i can't see it making any less difference on an s12, time to start saving................again

what size is the std roll bar, these are 27mm??? front and 26mm??? rear

whats the adjustable part for??? im not very clear on what you would need to adjust on a roll bar, i assumed you just had the bar as solid as you can to stop body roll????

anyone have any pics , as there site dont.

Cheers.

Yeh they are the same size as standard, but the adjustment allows the arm to receive more leverage reaction from the anti roll bar.

std are only 24 or 25 mm.front are same as rear, i measured them for the d bushes.

1" thick when I measured them yeh.

The S13 rear anti roll bar is only 1/2" thick, its lame.

25mm, i've got one in the kitchen and i've got 25mm anti roll dar D bushes for them.;)

1" is 25.4mm.

Don't Stella get pissed off with you building your car in your kitchen lol?

lol, she has to move the engine about the kitchen when she's doing my dinner, its on a barrow trolley, crank and intercooler are in the front room, turbo, thrott body,rear lights and polly bushes, are in the bedroom, engine and rad are in the kitchen, se rear wing was in the bedroom, but i put it up the loft last night,:D

dont blame ya shaun i wouldnt wanna be workin outside in that tiny freezing shed you have,my engines in the spare bedroom along with interior bits+motorbike stuff,2 seats & 4 wheels with tyres+3 boxes of s12 parts in my bedroom+turbo & shed to the roof full of s12 spares=ave it!

yeah mike,that shed is not the cleanest of places to strip an engine, it gets hot with the blower heater on, but its just not big enough.:)