rear coilovers
 

hi do you know any easy way to fit coilover on the rear i have s13 legs on the front so that sorted just near to do some think for the rear any ideas ???
thanks

Give money to BC Coilovers and enjoy coilover awesome sauce.

great idea but loads of money and my 3 month old girl comes 1st so cheap is the word or make

I'm sure Shaun (S13eater) will knock you up a couple of his rear end creations.

There you are Shaun, thats your first customer for the New ECU fund.:D

Count me in too:D

lol, i'am finished with them matey, i've been selling bits on aus ebay.:)

Would you be able to knock some up for the mrs s12? or let me know the legnth of the coilover tubes so i can cut some to size?

i'll get you all the measurements matey, the coilovers are only in the room next to my kitchen.:)

[pedant]they're not actually coilovers tho[/pedant]

*jogs on

:1la

ajustable spring platforms, but if they are no good then i may as well not post any info up about them then.

Post the info Shaun, this is good stuff, I;ve seen them in the flesh and they are spot on:)

Jost joshing there our Shaun :(

the metal tube for the platform is 50mm high, by 4mm thick and about 90mm diameter, then just grind a circle for the top out of some 4mm plate, the threaded tube is from rally design's its about 100mm long and if you use a 9 inch spring, then you can get the stock hight of around 12 inch and you can adjust it down by about 2 1/2 inch.:)

thanks mate for that i rung rally designs today its about £100 to do it + p/p
what weigth are the springs ?? i would like hard ride as its a track car and low !!!
so not standard heigh

they do them in all flavours matey, i used 315's on the front, then just checked the difference in the manuel between front and rear.

SOLD:)

I'll have 2 please:)