S12OC UK Forum

S12OC UK Forum (http://nissansilvia.co.uk//index.php)
-   S12 Discussion (http://nissansilvia.co.uk//forumdisplay.php?f=3)
-   -   fuel pump gasket! (http://nissansilvia.co.uk//showthread.php?t=2500)

Beany-s12 17-08-2007 20:57

fuel pump gasket!
 
don't suppose any1 might know part number, or maybe even just the size of the rubber O ring that sits between the tank and the pump top plate?
can't measure my old 1 as its stretched quite alot!
can't measure the tank coz had to put my pump back in!
i rand nissan today and they weren't very helpful!:ghey

umpkin 17-08-2007 21:11

i had same prob, and now mine stinks of petrol when i fill up the tank full (when i can afford it :D)

i think this might be the one, but not totanlly sure as it dont say Oring like i would hope it might.

http://www.umpkin.pwp.blueyonder.co.uk/oring1.jpg

http://www.umpkin.pwp.blueyonder.co.uk/oring.jpg

second one shows part number.

Beany-s12 17-08-2007 21:16

ok nice 1. will order it tomorrow and c wot gets delivered! will let u know if its that!

s13eater 18-08-2007 00:10

yes its a twat, i cut mine and made it smaller, not the best way, but it worked, i'am a tight bastid :D

doski 18-08-2007 07:23

a good thick bead of Nissan engine sealent, the good orange stuff would do the trick:cool:

Beany-s12 18-08-2007 14:22

part ordered! should be here tuesday! lets see wot i get

PukkaSilvia 18-08-2007 14:33

put some tank tape on it !!!!!!! lol:ghey

Beany-s12 18-08-2007 18:11

was tempted to bodge it but enough cars to use i didn't see the point :1la

sideways danny 19-08-2007 03:42

Quote:

Originally Posted by s13eater (Post 19789)
yes its a twat, i cut mine and made it smaller, not the best way, but it worked, i'am a tight bastid :D

works a treat, done it loads of times. the seal will shrink back to original size if it's left to dry out for a while though so if you have the time to just leave it, it's probably worth it. if not, just cut it and but the ends :)

umpkin 21-08-2007 22:20

was it delivered??? and more to the point was it the right bit??????????????


All times are GMT. The time now is 19:43.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.