Avo springs vs. Kyb gr2 front inserts
 

Me again :D
We were doing the front suspensios, and when we assembeled the front shock the spring was much to short:
http://img380.imageshack.us/img380/3...3080205vc4.jpg
First we thought maybe that maybe the insert didint go all the way down, that its supposed to, because the cap didint go all the way down, and i did not use the washer suplied (because in that case the cap would even fit at all):
http://img341.imageshack.us/img341/1...3080207jk8.jpg
Than we compared the stock spring with the avo one:
http://img380.imageshack.us/img380/1...3080210pn3.jpg
Now thats more like 60mm drop to me (rather than the advertised 35mm), oh and its supposed to be the right spring (the part numbers match, i double cheked). I havent measured the rear one yet, but i guess it would be simmilar. Are they always like that.
Now this looks wrong to me somehow, but right now the only solution that i could think of is to shorten the shock, so it works with the ridiculously lowered springs. Any suggestions?