S12OC UK Forum

S12OC UK Forum (http://nissansilvia.co.uk//index.php)
-   S12 Discussion (http://nissansilvia.co.uk//forumdisplay.php?f=3)
-   -   There is another!!! (http://nissansilvia.co.uk//showthread.php?t=4900)

gripo 06-03-2010 12:21

There is another!!!
 
:eek:

http://www.club-s12.org/forums/index...ic=18277&st=20

351bhp from a ca18et!!! can you desifer any differences where he is getting his extra power from Jon or Shaun?

Got our work cut out!!!

s13eater 06-03-2010 17:53

its possible, don't forget i made over 300bhp on an engine that had done around 45 to 50k, slipping clutch and accordind to 30psi, the cam belt was one tooth retarded, so who knows what it would have made;), we are relying on you now grippo .:)

Draconis 06-03-2010 18:52

Well dont worry about it being a yank. :p That was from a while ago hailing from Finland. They have a bit of crazy shit over there.

gripo 06-03-2010 19:35

I will do my best! (well Jon will :))

Is nitrous classed as cheating?

Have I left every stone uncovered? Is there anything else apart from upgrade the T3 to the T34 that I can now do??

irish s12 06-03-2010 20:17

Did you see how much he says he has spent on his engine wtf

PukkaSilvia 06-03-2010 23:32

well you could get shaun to make you a even better inlet manifold at some point.
I personally think your intercooler is too big but it shouldnt effect peak power with the t34 i doubt.
Water injection maybe an option if you get det at silly high boost levels

PukkaSilvia 06-03-2010 23:39

to save peeps trawling heres the pics fro the above link
http://www.dnsf.org/forum/index.php?...ch=31036;image
http://www.dnsf.org/forum/index.php?...ch=30299;image

s13eater 06-03-2010 23:48

t34 should be ok up to 380bhp, probably on a det, a bit less on the et, i could make a better manifold with ram pipes in, nitrous don't count paul, lol.you should not get ant det if its mapped right, i used high boost with no probs matey.

s13eater 06-03-2010 23:53

you really need to design a manifold thats going to work with your cam, or get a cam designed, then work a manifold out, i was going to do a plenum like that, but then went onto the fj, i'ad like to make one up if anyone would pay for the metal up front.

gripo 07-03-2010 00:11

You know me Shaun, I would like you to make me one if you think its worth any extra! give me a ball park figure of prices etc :)


All times are GMT. The time now is 13:14.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.