S12OC UK Forum - Sandwich plate

S12OC UK Forum (http://nissansilvia.co.uk//index.php)

- S12 Discussion (http://nissansilvia.co.uk//forumdisplay.php?f=3)

- - Sandwich plate (http://nissansilvia.co.uk//showthread.php?t=991)

Anyone tried fitting one of these ? What do you guys reckon as they are quite cheap :rolleyes:

http://cgi.ebay.co.uk/Anodised-Oil-T...QQcmdZViewItem

i'm looking to get a sandwich plate for my oil. cooler as well, and after some research, this is what i've found.

Here are the specs of the oil filter, so you need to find one that's got the proper diameter so the rubber seal with actually seal, and also you have to match the thread pattern.

Gasket I.D. (Inches):2.01''
Gasket I.D. (mm):51.054mm
Gasket O.D. (Inches):2.49''
Gasket O.D. (mm):63.25mm
Height (Inches):4.067''
Height (mm):103.3mm
O.D. (Inches):3.234''
O.D. (mm):82.14mm
Style:Spin-On Lube
Thread Size (inches):3/4-16

As long as those things check out, there shouldn't be a problem. Keith on club-s12 is running a sandwich plate on his car for his oil cooler as well. I believe he got it through a company in the USA called Summit Racing tho.

Quote:

Originally Posted by indecisive

Keith on club-s12 is running a sandwich plate on his car for his oil cooler as well. I believe he got it through a company in the USA called Summit Racing tho.

Yeah, I bought it from Summit, but the brand is by Perma Cool...... www.perma-cool.com
Here is my set-up...........

http://www.cardomain.com/ride/675796/7

Yes i have one exactly the same fitted at the moment.it works fine. I siliconed in the blanking plugs that were supplied for if i wasnt using all the sencor ports.i had to do this as the blanking plugs werent taperered. that was my only gripe.....