Quote:
Originally Posted by alundra
Who've done this, easy?
|
Not incredibly difficult but here's a few pointers:
Disconnect the battery
Remove the bracket on the side of the inlet manifold
Remove both wires, ones a plug and the other is held by a 10 or 12mm nut.
Get a 14mm spanner preferably a rachet spanner
Remove the 2 bolts holding it to the gearbox
Remove the cylinder on the side of the starter, this is the solenoid. Its held by 2 long thin bolts. Be careful with the clip but chances are it will spring out.
Clean up the solenoid, refit and enjoy a new starter motor.
Probably looking at 1-2 hours to do it