ALternatives to Powerflow

CamInHead · #1 21-04-2009, 22:43

Anybody know of any stainless exhaust guys other than powerflow ? There don't appear to been an PF dealers in Manchester.

northerner · #2 21-04-2009, 22:55

Tube torque Macclesfield used to do loads for the old NTOC. I had one made and it was great! Try google it

s13eater · #3 21-04-2009, 23:19

Quote:

Originally Posted by northerner

Tube torque Macclesfield used to do loads for the old NTOC. I had one made and it was great! Try google it

i'am sure they are closed now, so i was told, but there is another at macclesfield'i was'nt impressed with tubetorque, £125 for a 3 inch downpipe which ended up to be 2 1/2 inch and it was £125, and he was sat in the pub all day and left a yound lad in charge who new feck all, i made a better job of my 4 inch down pipe myself, get some stainless bends and do it yourself mate, it cost me £180 in stainless to do a 4 inch stainless side exit.powrflow charge about £350 for a 2 1/2 full system.

sideways danny · #4 22-04-2009, 01:11

pro-speed in cardiff is the only place i'd go for a fabricated exhaust.

CamInHead · #5 22-04-2009, 20:24

fabrication isn't my thing

paulsilv · #6 24-04-2009, 00:13

Can you do a side exit for me at £180 Shaun

s13eater · #7 24-04-2009, 04:14

Quote:

Originally Posted by paulsilv

Can you do a side exit for me at £180 Shaun

only if you use a top mount and at least a t34

.

CamInHead · #8 11-05-2009, 20:30

Emailed LongLife for a quote and I noticed a van from a tuning place not far away which mentioned custom stainless exhausts.

paulsilv · #9 12-05-2009, 16:05

Try Custom Pipes in Doncaster, seen their work and its very good.

A friend of mine had an integra type R which was killing every custom exhaust he put on it. After spending silly amounts of money he went to these guys and they explained everything and why the other exhausts were dying or falling apart, and then fabricated him one which works perfectly. The car is actually quicker than it was on any of the others.

CNHSS1 · #10 12-05-2009, 17:03

Quote:

Originally Posted by s13eater

i'am sure they are closed now, so i was told, but there is another at macclesfield'i was'nt impressed with tubetorque, £125 for a 3 inch downpipe which ended up to be 2 1/2 inch and it was £125, and he was sat in the pub all day and left a yound lad in charge who new feck all, i made a better job of my 4 inch down pipe myself, get some stainless bends and do it yourself mate, it cost me £180 in stainless to do a 4 inch stainless side exit.powrflow charge about £350 for a 2 1/2 full system.

think Tony Law is near Macclesfield, not cheap but he makes exhaust porn