back seat

[rpettafor]

how do i get the bench bit of the back seats out? tried for ages yesterday without any success

Thanks

Rob

[30psi]

Just bolted in. Can't remember exactly but its easy.

[adzs12]

The arse section is fastened down by a metal prong type thing, one at either end of the seat, get a flat head screwdriver and lift the seat up as much as poss and you will see what i mean, just wedge the screwdriver in the middle of the prong and pop it up.

Once this is out the way you will see a bracket that holds the 2 sections of the back seat together in the middle. undo this then fold the seats down and then undo the four 10mm bolts that are on the back of the seats facing the boot once there folded down. Theres 2 bolts for each side.

[bigtim]

Just pull the bench seat bit up about a foot in from each end.

[adzs12]

Yeah or that lol, i found a screwdriver works best if you dont want to break you finely manicured nails, richard k told me about it

[PukkaSilvia]

Definatley unclip the prongs by sliding a flathead screw driver under the seat. it takes about 2 minutes once you know this

I dont have hands like Richardk but i still like to keep things stress free