Driveshaft question

[JackieFan]

If anyone has a complete Long (N/S I think) S12 Driveshaft, could you do me a favour and measure it fully compressed and fully extended from the surface of the flange that bolts to the inner side of the hub, to the flat surface of the stub axle that sits flush with the Diff casing.

[s13eater]

passenger side is the short one, drivers is the long one, the long one measured when the shaft is layed rested on its own, is 18 inch, you can push it in to around 17 1/2 inch, you can actually pull it out and stretch the boot to 19 inch.

[northerner]

I'm glad your taking about Drive-shafts and not the other !

[JackieFan]

Originally Posted by s13eater

passenger side is the short one, drivers is the long one, the long one measured when the shaft is layed rested on its own, is 18 inch, you can push it in to around 17 1/2 inch, you can actually pull it out and stretch the boot to 19 inch.

Top man, thanks Shaun

[s13eater]

Originally Posted by JackieFan

Top man, thanks Shaun

no probs mate.