|
|
|
|
#1
06-02-2008, 16:18
|
|||
|
|||
My compression test
Hi,
After a fresh rebuild (Nissan head gasket, head verified for skimming or not), my car smoke some white one throught exhaust. So i check the compressions (motor on heat): cyl1:  cyl2:  cyl3:  cyl4:  In order to fix if the turbo leaks some water in the exhaust, the water line which feed the turbo return to intake manifoild. Still smoke, at idle, at middle throttle. I notice some smoke -grey- in exhaust gasket area (head/exhaust manifoild? or manifoild/turbo?) No shaft play at left-right a few front-rear about my stock T2. What do think about? P.S: i'll order sooner some nissan exhaust gaskets, any better one? 
|
|
#2
06-02-2008, 16:31
|
||||
|
||||
|
how much running in time/miles has the engine had since the rebuild?
when i built my current engine with pistons and re-bore etc, it did smoke a little to start with whilst it bedded in. also there was some oil to be burnt off that i used to lubricate all the internal parts when re-assembling the engine. it soon settled down and stopped smoking as the rings etc bedded in 
__________________
 Racing is life. Everything else, before and after, is just waiting. - Steve McQueen
|
|
#4
06-02-2008, 20:14
|
|||
|
|||
|
might be moisture in the exhaust
__________________
     
|
|
#5
06-02-2008, 20:56
|
||||
|
||||
|
Why did you rebuild it?
__________________
 Quote:
|
 |
|
|
Hybrid Mode
