![]() |
|
#1
|
||||
|
||||
![]()
OK chaps, bit of a weird one this, but im looking for a bolt on balljoint with the same taper as the uprights im using (not Nissan or even close!) and came across these on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.d...ssPageName=:IT Are these the same as the S12, and if so can someone measure the taper diameter. I need the diameter at the bottom of the taper, diameter at the top of the taper, and the distance between the two. Cheers CNH
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#2
|
||||
|
||||
![]()
16.2 mm at the top and 19.5mm at the bottom,
![]()
__________________
![]() |
#3
|
||||
|
||||
![]()
Ive got that very ball joint at home.
The S13 is the same size taper as the S12 as well
__________________
![]() |
#4
|
||||
|
||||
![]()
cheers guys, unfortunately i need 12.25 to 14.5 ish
![]() thanks for checking tho.
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
![]() |
|
|