ABS on an S12

[RichardK]

Is there any possible way I could put ABS on my S12?

And if so..... how?

[JackieFan]

The S13's came with ABS so might be worth looking for one being broken on SXOC.

I guess you'd need...

Wheel Speed sensors
ABS ECU (If it's even separate)
ABS Pump
Might need the Servo and Master Cylinder
A few lengths of Brake line and tools to make the ends up

God knows how you'd go about it but anythings possible if you've got the time and money

[30psi]

You would need the S13 front hubs and the S13 diff which has a sensor in it to get this to work. Or use an S14 system which I think has sensors on each rear driveshaft as opposed to the pinion shaft on the S13.

Again, why bother?

[old-and-rusty]

Hi Rich,
This is one of the mods I`m doing to my s12. But I did have a complete 200sx donor car to start with. The ABS module is located behind the 200`s rear quarter panel. As I`m transferring the complete wiring loom over into the s12, it shouldn`t be too difficult for me (I`m using a modified version of the 200 dash also). But to be honest, I think it would be too much hassle just to install the parts separately .
Regards,
Ian.

[30psi]

Maybe install an airbag too?

[old-and-rusty]

Originally Posted by 30psi

Maybe install an airbag too?

and traction control, furry dice and cup holders...LOL...

I guess it`s down to personal choice though. I will be driving the car in anger a lot and considering the amount of rain we get up North, it seems a sensible decision to me.

Plus I don`t know of any other s12 with ABS, so that`s a good reason in my eyes...LOL... .

Regards,
Ian.