Baily dump valve

Andy · #1 31-03-2006, 21:06

Hi to all, need advise on dump valve fitted one to day i think it is a single piston, idles better but then wants to conkout then when driving on slowing down it goes to stalls please help!!

Andy

adzs12 · #2 31-03-2006, 21:18

Do you have a picture of the dump valve as this sounds like the behavour of a diaphram type

Either that or its knackered Or you have a vaccum leak somehwere.

Andy · #3 31-03-2006, 21:48

Hi
not got pic at mo but its a baily motor sport has a piston with slots round the side with vac hose on top.

if thats any help

Andy

adzs12 · #4 31-03-2006, 21:52

Sounds like a vaccum leak, where and how have you installed it? what have you teed the vacum line off for the dumpvalve?

Andy · #5 31-03-2006, 22:02

Hi
tee off using samco just befor inlet throttle body/housing then vac hose to the side of inlet manifold that blanking nut which threaded in the side

Andy

adzs12 · #6 31-03-2006, 22:34

Its hard to understand over a forum sometimes mate but my only advice is to check for vacum leaks as this is what it sounds like.

Make sure all your pipes are on tight and split free