auto to manual

[s13eater]

other than pedal box and clutch slave cylinder, can you think what else i'll need to convert to manual, apart from the obvious, gearbox

[datdrift]

auto box has a different size(bigger) crossmember, so you will have to fabricate one, also the prop is a different size.

pedal box is a bastard to fit/remove......enjoy

[s13eater]

is that all then mate, its having an rb25 gearbox in anyway, so i'll have to fabricate something.

[reece]

Originally Posted by s13eater

other than pedal box and clutch slave cylinder, can you think what else i'll need to convert to manual, apart from the obvious, gearbox

(i) Dont forget to put a spigot bearing in.

(ii)I think there is a like a coller you have to remove so you can mount a flywheel instead of a flex plate but i may be getting confused with the v6 I put in my s12

[30psi]

Shaun

Have a search on sxoc as a few of us rambled about this...

[s13eater]

i'am not using the caet engine thats in, i'am using a manual fj20. i'll do a search on the sxoc.