z32 caliper

[s13eater]

i eventually fitted my z32tt calipers today, i also flushed all of the old fluid out, no idea what they feel like yet because the rad and intercooler are still off of the car, i've been marking the vernier pulley up ready to swing the cam timing.

[northerner]

Good job Shaun, any pics matey and what discs you using?

[s13eater]

i'll get some pics 2moz mate, i've put the wheels back on for today and had bangin head and sinuses for the last week,i've only got stock discs up to yet, cash is low , my rear pads are about down to the wood, so i'll have to replace them on thursday.

[30psi]

What are you marking up on the vernier pulley?

[s13eater]

i've had increments marked onto the pulley for ajusting the timing.

[30psi]

Good idea, but you can't just move it 2 degs because you don't know if its spot on to start with.

Ideally the standard timing should be 112degs but if you've had the head or block skimmed (and) along with natural engineering tolerances you may find it still to be slightly incorrect after you've moved it 2 degs to 110degs