I need some help!

[blueneon]

The silvia had developed a starting problem, somtimes it would take an AGE to start, then run lumpy for a while and then would be fine,

So I have replaced plugs, leads and dizzy cap. The thing is I have had to remove the dizzy to get the cap of as the screws were rounded off.

Now i replaced the cap, checked the leads, checked ALL the timing marks and the mark on the dizzy but the car wont start.

Here is the timing checks i made.

Bottom pulley, TDC
Top pulley (cambelt top cover removed) timing mark at the top
Dizzy Punch mark aligned, rotor arm pointing to #1

We have a good spark and lots of fuel, everything is aligned, all eartha are good all cables connected, can anyone help?

Thank you

T

[northerner]

Terry posted you on ZXOC !

[umpkin]

i too answered on ZXOC

[blueneon]

Thanks guys, its still not working tho

[northerner]

Updated now.

[PukkaSilvia]

The punch mark on the dizzy can be confused with a stupid assembly pin on the dizzy if your not familiar with it