ok, i got 4 injector plugs ( 2 pin ), i got a sensor on the side of the throttle body,another sensor mounted on the inlet manifold ( i think, also a 2 pin ) there is a 3 pin plug between piston 2 and 3 that is not used, there is a grey multiplug which is used, there is 4 grounding pionts for the injectors, and then this lonely connector that is roughly in the same position as the 3 pin that is between piston 2 and 3.
this wire was connected but had frayed, and i followed the wire to which it is connected and it lead me to just above the starter solenoid and just below the inlet manifold.
__________________
dont hate speed bumps, they make ladys boobies jiggle!
|
30-01-2007, 20:02
Threaded Mode