Throttle position sensor

[silviagod]

Does anyone know if the voltage output from the throttle position sensor on my Silvia is suitable to be used for the SAFC II. With the car being fitted with automatic transmission there is a second plug under the throttle contacts. The middle wire that is light blue gives an output of 0.5 Volts with the throttle closed and very close to 7 Volts with the throttle fully open.

I have been looking into this on T'internet and the max output voltages from other vehicles seem to be no higher than 5 Volts so before I hook up the grey throttle sensor wire I need to know that it won't fry the SFC II.

I have emailed Apexi but have not had a reply. I have also tested the voltage output on another Automatic Silvia and that gives the same output voltages. Any help will be appreciated.