New project

[northerner]

Well I went to start the car this morning and it didn't want to go! So I whipped out the Ecu and it gave the Water temp sensor. Upon checking it, I found that the connector was half missing and the contacts were rotten. Also as I pulled it off, I found one of the wires had been soldered before and snapped. So I fixed it using a decent Injector connector I had lying around and soldered the joints good and proper, job done!. I also took off the Coil and cleaned up all the wires and metal joints and added another Negative wire to the inner body. These are really prone to corrotion! No more starting problems.