Uprated Steering rack bushes

[s13eater]

i'll go and check for you in a min.

[30psi]

Ok, get a pic if ya can

[datdrift]

i just had a quick look at my old rack, and the bushes are different, the pass side one seems to just be a circle shape, while the drivers one is angled upwards a bit....pic might show what i mean......



and one of my new rad

[30psi]

Ah ok, that suggests that the S13 kit should work. Look the same shape to me.

If using a manual rack you would need 2 LHS bushes and clamps

Nice DB power rad there mate

[datdrift]

i had a quick look on club-s12 last night, and they seem to think that the s13 ones are too thin?

they use some 'window weld' stuff which seems to be some kind of polyurethane paste which sets hard, they make a mould or summit.....they also fill their rear subframe mounts with it. not sure if we get a similar product over here?

[30psi]

Yeh that stuff is called Flexane.

[doski]

just need to find someone with a set of s13 bushes and see if they are the same or to thin, does anyone know how much a standard set are???