runnig probs

[Dr Silvia]

just been told the afm is reading 99% at 3000rpm, methinks theres an air leak somwhere that or the afm is kippered

[30psi]

So its reading full voltage at 3000rpm?

Sounds like a possible wiring issue to me.

[Dr Silvia]

i doubt that personally having done it myself

this is supported by the fact it was functioning as normal previously

[30psi]

Sure it was working previously but whats to say the wiring hasn't gone faulty?

Just strike's me odd that its showing a full 5v at the SAFC. Not really known the AFM's to bugger up like that.

[Dr Silvia]

neither have i tbh but its still possible.

having overseen the intercooler installation i do think it is rather likely as bodgeries were made, i tested each solder joint i made on the safc before i insulated them, its wortha wiggle if nothing else if obvious yes, but have some confidence in me dammit

[30psi]

Whats to say there isn't something gone adrift with the settings with the rpm %'s?

[Dr Silvia]

true things could have been tampered with, might be going to have a butchers tomorrow after work and the truth will out!!