![]() |
|
#1
|
||||
|
||||
![]()
Hiya mate, stick at it, it will be worth it in the end
![]() The rear springs are not attached to the car, they just sit in rubber seats. That`s why people that have lowered springs can have the problem of the rear springs falling out when the car is jacked up ![]() I had the same problem jacking my car up (when it was lowered), a trolley jack wouldn`t go underneath. Either get a mate to lift the back of the car up a little so you can get the jack under, use the standard scissor jack to raise the back up a bit first, or invest in a good quality low entry trolley jack (whch is what I had to do). I know it`s a pain, but keep going ![]() Regards, Ian.
__________________
|
#2
|
|||
|
|||
![]()
rubber bottom seats are knackerd... and its lowered 35mm so that could be why they dropped so much i guess... isnt spring security a mot issue tho? seem to rember on the s14 when one spring came loose it failed the mot...
just spent stupid money on a jack i cant evean lift but it will happily raise anything from the s12 to the van right off the ground ![]() |
#3
|
||||
|
||||
![]()
yes i've had probs with the mot before, i just fitted steel rope straps each side so the arms don't drop to low.
__________________
![]() |
#4
|
|||
|
|||
![]()
Some pics:
New Wheels: ![]() ![]() ![]() ![]() Still needs a few coats of paint and a few little bits but thanks to silvia god today i think she is all their ![]() |
#5
|
|||
|
|||
![]()
some new pics:
![]() ![]() ![]() ![]() next weekend the DET is going in ![]() |
#6
|
|||
|
|||
![]()
And Its...... Still not finished
![]() DET is in just needs wiring up, Paint needs touching up were i almost put the engine through the front end of the car when it wouldnt fit at first... after fitting the engine i got destracted by this: ![]() ![]() http://uk.youtube.com/watch?v=3hSJ6lYZxiI Sound she makes ![]() RX7 FC3... Never drove anything that handles so well (wipes the floor with both the sx's i had) |
![]() |
Thread Tools | |
Display Modes | |
|
|