Rebushing Rear Arms

[s13eater]

if they are the same as the s12 sleeves, and you are using poly bushes, then you need to leave the sleeves in, otherwise use an hacksaw blade carefully cutting along the inside lenght.

[CamInHead]

Originally Posted by s13eater

if they are the same as the s12 sleeves, and you are using poly bushes, then you need to leave the sleeves in, otherwise use an hacksaw blade carefully cutting along the inside lenght.

uh.......'k......

maybe I can get oversized polys or something.....

[CamInHead]

Okay after some research it looks like removing the OEM rear trailing arm bush shells was probably a bad idea Apparantly over size bushes aren't going to happen but hopefully a local machine shop can whip up some replacement shells.

In the mean time I've been playing with the Nolathane site and I see the Z31 300zx bushes cross-over with N13/14 Sunny front lower wishbone which I can get locally ie; not the other side of the world. Also the quoted bush dimensions will fit without the shells but I'll just see what happens.

edit: actually that can wait for now I've just spent over £100 @ Bilt Hamber

[alundra]

I made holes with a drill to fragilize the original bushing and use an air heat gun to burn eat:



http://www.dailymotion.com/video/xba...amehameha_auto

After cooling the bushing is a bit harder (not elastic) and damaged the sleeve can be easily leave with a hammer.

If you have a garden petrol and burn can be also good but be careful.

[s13eater]

Originally Posted by CamInHead

Okay after some research it looks like removing the OEM rear trailing arm bush shells was probably a bad idea Apparantly over size bushes aren't going to happen but hopefully a local machine shop can whip up some replacement shells.

In the mean time I've been playing with the Nolathane site and I see the Z31 300zx bushes cross-over with N13/14 Sunny front lower wishbone which I can get locally ie; not the other side of the world. Also the quoted bush dimensions will fit without the shells but I'll just see what happens.

edit: actually that can wait for now I've just spent over £100 @ Bilt Hamber

you silly bugger lol, if you'd only listened , should not cost you much to get some sleeves done, can you work out the size you want ? or do you want me to measure the internals with the verniers matey ?

[CamInHead]

What's that you say ? Custom poly bushes ? Yes please!

[s13eater]

i best start thinking of getting my rear fitted, just finishing the coilover convertion.sh!tty weather.

[CamInHead]

N14 Sunny/Pulsar leading edge front wishbone (powerflex part no. PFF46-101) bush fits Z31 trailing arms perfectly. Rawr, go me.