T3 Conversion Done

TOMO200 · #1 24-10-2006, 09:36

The T3 conversion has been completed, the work done Buy S13Eater with a little help from myself

Also cozzie 4x4 intercooler on.

It took about 3 days due to problems like the bulk head getting in the way of the front pipe which S13eater sorted with an angle grinder

Car is just having the frontpipe welded up as i type this and the car should be on the rollers tomorrow to check the fuelling etc as advised by S13eater

s13eater · #2 24-10-2006, 09:54

i lurrv my angle grinder

.

nissan_turbs · #3 24-10-2006, 10:57

Top work guys- got any pics?

TOMO200 · #4 24-10-2006, 14:05

shud have soon mate

PukkaSilvia · #5 24-10-2006, 19:15

i predict 215bhp at the flywheel at 16psi......... ..

Anyone else fancy a guess?

s13eater · #6 24-10-2006, 19:59

i'd say more like 220bhp at the fly

PukkaSilvia · #7 24-10-2006, 20:04

Has he got a decent exhaust system?

s13eater · #8 24-10-2006, 20:10

3 inch downpipe onto 2 /14 inch straight through.din't martins make about 237bhp with cam and headwork plus t3, mine made 229bhp on the t25.

PukkaSilvia · #9 24-10-2006, 20:32

my old t3 setup ran 225 at fly at 15psi fading off to 13 psi for some shit reason. I didnt realise he had done the exhaust. It should be pretty good then

s13eater · #10 24-10-2006, 20:39

what was the fuel like on the stock ecu ?and where did the boost come in ?, what about your t3 martin, what rpm did that come in at?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode