T3 Conversion Done

[PukkaSilvia]

Has he got a decent exhaust system?

[s13eater]

3 inch downpipe onto 2 /14 inch straight through.din't martins make about 237bhp with cam and headwork plus t3, mine made 229bhp on the t25.

[PukkaSilvia]

my old t3 setup ran 225 at fly at 15psi fading off to 13 psi for some shit reason. I didnt realise he had done the exhaust. It should be pretty good then

[s13eater]

what was the fuel like on the stock ecu ?and where did the boost come in ?, what about your t3 martin, what rpm did that come in at?

[sideways danny]

Originally Posted by s13eater

what was the fuel like on the stock ecu ?and where did the boost come in ?, what about your t3 martin, what rpm did that come in at?

Martins boost came in with a big kick at about 4,5k

[30psi]

Yeah about 4-4.5, definitely not below.

I got 215bhp at the wheels on a known accurate dyno. I think it will make about 200 at the wheels most. I only have a 2 1/4" exhaust.

My max power was at 6,100rpm, Toms will be closer to 5,500rpm. It may have the same torque, but lower in the rev range and therefore a little less power.

Depends on the dyno though. Its been seen to be a pretty subjective test where results vary alot.