S12OC UK Forum  
S12 World Affiliate Program
S12 United Kingdom / Club-S12 International / / S12 France / S12 Eastern Europe / S12 Sweden

Go Back   S12OC UK Forum > Main Categories > S12 Discussion
User Name
Password
FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Display Modes
  #1  
Old 28-11-2014, 10:14
bigdaves12 bigdaves12 is offline
Registered User
 
Join Date: Feb 2011
Location: Nottingham
Posts: 314
bigdaves12 is an unknown quantity at this point
Default ca18det misfire backfire under load

My det struggles to start, sluggish for a few seconds, then idles around 1100 rpm with a slight misfire, after a short while kind of after initial warm-up idles at around 800/900. When accelerator is applied it is misfiring and backfiring badly.

Things checked:

New plugs, gapped correctly
Coils swapped out
Maf removed and tested, working fine
Compression is 150 across the board
Ecu shows no errors, code 55. Did show detonation sensor but that is bypassed with a m ohm resistor
O2 sensor unplugged no difference
Previously checked the timing and was bang on

The car is at mot stage, just not running right

Any gurus point me in the right direction? I also think maybe my vacuum lines are on wrong but can't find a definitive guide anywhere
Reply With Quote
  #2  
Old 28-11-2014, 19:45
northerner northerner is offline
PAID MEMBER
 
Join Date: Nov 2005
Location: Newcastle NE
Posts: 1,809
northerner is on a distinguished road
Default

Have you checked the fault codes on the ECU, are the plus/coils firing properly?
__________________
Reply With Quote
  #3  
Old 30-11-2014, 23:42
s13eater's Avatar
s13eater s13eater is offline
PAID MEMBER
 
Join Date: Nov 2005
Posts: 5,124
s13eater is on a distinguished road
Default

any cracks in or boost pipes off ? fuel pressure reg, fuel filter blocked, injectors,spray carb cleaner around inlet manifold gasket and around boost pipes, see if the revs go up.
__________________
fj20/et a replacement for displacement
Reply With Quote
  #4  
Old 05-12-2014, 23:40
bigdaves12 bigdaves12 is offline
Registered User
 
Join Date: Feb 2011
Location: Nottingham
Posts: 314
bigdaves12 is an unknown quantity at this point
Default

Quote:
Originally Posted by northerner View Post
Have you checked the fault codes on the ECU, are the plus/coils firing properly?
All codes are clear on the ECU, it did have the knock sensor error, I've gotten a fresh length of shielded wire and wired it up, that code is gone and it ran a bit better.

Quote:
Originally Posted by s13eater View Post
any cracks in or boost pipes off ? fuel pressure reg, fuel filter blocked, injectors,spray carb cleaner around inlet manifold gasket and around boost pipes, see if the revs go up.
Boost pipes seem ok but I haven't properly tested for leaks with a compressor etc. Tried the carb cleaner around the piping, no change.

I did speak to Elliot who I bought my Mk1 from, he had an s13 det he told me to bypass the boost solenoid and go from the back of the intake straight to the FPR, misfires a lot less. Still feels like a small misfire on idle but no where near as much. Misfire is only there on acceleration at around 1200 - 1500 rpm. After that it's sweet.

EDIT: Oh yh, it's now MOT'd. Passed with flying colours no advisories!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:27.

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.