#21
|
|||
|
|||
Yes its the diesel crank this is the one I bought they have more if you ask them & only 60euro each!!! beats the tomei stroker BS! Only prob was poor packaging they wrapped them in newspaper in an oversized box instead of just wrapping them in rolled up cardboard so Im a bit worried about hairline cracks etc. Youd think they would make a better effort for being German and me buying 2 of them. The price was excluding freight of course.
http://www.japanautoteile.de/parts/p...2&cat=0&page=1 I will get the info and pics of the ca20det that 2 peeps have done and one in particular on the aussie forums raced in an s12 racecar which he took to 86.5mm which is quite crazy but the longer rod provision due to the taller deck height puts less stress on the bores also. There is a Norwegian or Fin on the US forums that is building a CD20DET which is a heavy block but almost a copy of the 4g63T engine just without the balance shafts and very tall 230mm block compared to 223.45mm ca20e and 204.45-65mm ca18det. sounds great about the spacer plate! (hope he can post to my destination australia and perhaps take paypal?) love the ca20det manifold workaround using that nice looking laser or waterjet cut flange very spiffy! Here is the CA21det using cd20 block and ca18det 4 port head http://forums.nicoclub.com/ca21det-build-t550380.html here is a crankshaft comparo ca20 on left and FCW CD20 on right Last edited by datsober; 17-01-2013 at 12:38. |
#22
|
||||
|
||||
any info would be great, its wetting my appetite again!
any links to the forums too would be useful. Are you interested in a CA20 fwd facing manifold? if so, i know another guy thats selling one, if it hasnt already sold? Craig
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#23
|
|||
|
|||
Found it! there is a bit of info in alot of his post just not all in one spot...
Candellan is the man to speak to he did 2 versions of the motor one with stock thin spaghetti ca20e rods and the other with the mitsubishi 4g63 150mm rods or close to that length. He was revving to 6500rpm with the stock prepped italian noodle rods but surely could go more but he wanted a reliable beast and did quite well compared to his upgraded sr20det. http://club-s12.org/retro4/index.php?topic=14046.0 http://club-s12.org/retro4/index.php...0651#msg310651 http://club-s12.org/retro4/index.php...4802#msg274802 Is the exhaust manifold on the FWD turbo different a little more forward or all the same? pretty much want a lighter inlet manifold custom made as I have some ideas Id like to implement for lpg using a clean lightweight mitsubishi diesel equal length manifold. |
#24
|
||||
|
||||
Anyone know which uk cars the CA20 came in?
Also did we get the cd20 diesel in anything, car or van? Or did europe?
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#25
|
||||
|
||||
did'nt the bluebird have the 20ltr diesel in it craig ?
__________________
fj20/et a replacement for displacement |
#26
|
||||
|
||||
Dunno, my knowledge of the other engines is pi55 poor
Will see what i can google re bluebirds though, cheers for the tip off
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#27
|
|||
|
|||
Craig. here is the proper link with pics for the ca20det
http://club-s12.org/retro4/index.php...985&hl=CA20DET |
#28
|
||||
|
||||
datsober
ok, so now youve wetted my appetite and ive been looking at bloody nissan diesels on google, wiki and ebay lol. few questions have you pics of the diesel rods? are they beefy enough to run big power? dont fancy the guy that used shot peened CA20 versions, they are too weedy! also have you pics of the CA20 and CD20 sumps please? i can see some scrapyard hunting soon and a garage full of more old engine bits! did the guy contact you re teh crank brace? cheers Craig
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#29
|
|||
|
|||
rod pics are here but I think they are too long for the ca20e 223.5 mm block as the cd20 is 228mm so would need 5mm shorter piston which would mean you need 25mm pistons big bore custom hayabusas.
http://forums.nicoclub.com/ca21det-build-t550380.html dont have the cd20 engine just the ca16,8 & 20 but the sump on the ca20e looks like this one, a little deeper etc. will try and get a pic this week sometime http://www.ebay.com/itm/JDM-Used-86-...-/190256803607 http://www.soshinusa.com/STC-Ebay/Ni...nza-CA20-2.png here are some nice goodies have a looky at the turbo exhaust manifold adaptor would that improve a stocky ca18et one? http://www.flipsidecustoms.com/?p=213 got some pics of the sump from my ca20e will post soon Last edited by datsober; 23-01-2013 at 07:37. |
#30
|
|||
|
|||
Under the dark den of sin managed to get it visible enough for my old brick sized decade old digital camera
http://s12silvia.com/community/index...&attach_id=847 http://s12silvia.com/community/index...&attach_id=848 Last edited by datsober; 23-01-2013 at 07:50. |
|
|