#1
|
||||
|
||||
boost problem
hi all, last week my S12 stopped boosting all together, it wasnt even registering negative boost, but after a quick look under the bonnet i found one of the vaccum hoses had split (assuming because of age) so i repaired it
it worked fine for a week but now its stopped boosting again this time the boost guage is still reading negative boost as normal but won't go above zero when driving, so am guessing this isnt another vaccum problem cos the guage would of just stayed at zero on tick over the boost pipes all look secure, actutor arm isnt stuck, i think the dumpvalve is fine too, could this be a problem with the safety valve on the intake manifold or something else??? any advice would be greatly appreciated
__________________
custom front coilovers, -40mm rear springs, de-spoilered, Bailey dump valve, induction kit, mocal sandwich plate with oil cooler, OMP deep dish steering wheel, unknown jap 14x8" slotmags from 1976 |
#2
|
||||
|
||||
check your actuator is'nt stuck open.
__________________
fj20/et a replacement for displacement |
#3
|
|||
|
|||
the other thing is disconnect the small pipe to the boost sensor whilst the engine is running and reconnect it and it should work.
__________________
|
#4
|
||||
|
||||
i don't get it but its fixed itself???? maybe the actuator or something has come unstuck, thanks for advice
__________________
custom front coilovers, -40mm rear springs, de-spoilered, Bailey dump valve, induction kit, mocal sandwich plate with oil cooler, OMP deep dish steering wheel, unknown jap 14x8" slotmags from 1976 |
|
|