apexi safc

duncan · #1 02-08-2006, 17:08

has anyone fitted one of these? if so could you tell me which wires you spliced into on the ecu please. i have it fitted in the dash now and i'm mad to get it wired up. many thanks....

indecisive · #2 03-08-2006, 01:25

we've got two writeups on club-s12.

http://www.club-s12.org/forums/index.php?showtopic=6468

http://www.club-s12.org/forums/index...howtopic=10604

it's for a safcII, but all the relevant information is there. you just have 1 less wire to splice compared to the SAFCII.

and just so you know...that ECU pinout is on the HARNESS side...I was looking at the connector from the ECU side, and got all the connections reversed from left to right and the damn thing didn't work..took me like two days to figure out with the help of people chatting to me and looking at the wiring diagram in the FSM

edit: also note that that pinout is for a USDM spec car..so it MAY be different, but I doubt it.

turbozx · #3 03-08-2006, 08:45

im just about to wire the safc 2 in and have sused the wiring ill post it up tonight!

30psi · #4 03-08-2006, 09:43

The wiring is easy, I told Adz-S12 how to do it

duncan · #5 03-08-2006, 14:45

nice one. thanks martin

turbozx · #6 03-08-2006, 18:42

SAFC_2_Wiring colour code.doc

Hope this helps

PukkaSilvia · #7 03-08-2006, 19:13

Dr silvia wired Adz safc11 up .He should be able to guide you through.

turbozx · #8 12-08-2006, 12:11

does anyone know what afm no. you type in to the safc 2 for afm type

HW 04 As the write up on the us s12 club states

Or HW 07 as the manual states for a s13 ca18det silvia?

turbozx · #9 13-08-2006, 20:36

fitted it today, for anyone doing this you need to take the RPM feed from near the coil BLUE wire not by the ECU as it doesnt work!

honest_jim · #10 26-09-2006, 23:34

Quote:

Originally Posted by turbozx

fitted it today, for anyone doing this you need to take the RPM feed from near the coil BLUE wire not by the ECU as it doesnt work!

mine did when i fitted one to my old car?