DiY coilover conversion
 

Thinking of doing a rally design coilover conversion
I was told by s13eater to get a 2 and a quater threaded tube....grind the spring cup off the std strut and weld it up. But can this be done at the back as springs and shocks are separate.... Spring is free so it is not a strut... So what should i do.
Any help appriciated
Thanks
Tss240zg

i've also done a rear conversion to mate, there should be pics on my build thread.

Found the thread
Did you have to reinforce the strut tower as i heard it can warp the sheet metal?

this set up just makes the rear end ajustable in height plus you can choose your own spring rates.this uses the original spring and shocker position, so no reinforcing needed.

In what cases will you have to reinforce the strut towers....
Noticed in your coilover thread a lot of the pics not showing... are they still on your photobucket page
Thanks
Tss240zg

no you won't have to reinforce the towers with that conversion, i'll check my photobucket mate.

Cheers

sorry mate, they look like they have been deleted, when was you thinking of doing the conversion ?

probably in february....