Intercooler
 

i now have my front mount on and cor dioes it make a difference in performance i was well impressed!!! and i now get huge amounts of turbo chatter! im runin 11psi with full exhuast indutcion kit t28 gas fowed manifold n fmic whats the max boost i can run?

you would need to put it on a dyno to find that out.

i wouldnt take the boost any higher until then

or you could do wat i did with mine lol.............turn it up as high as i cud and see how long it lasts......... about 20mins reading 16psi lol

i hope you haven't ruined my auntie silvia ya cruel bugger:eek: :eek:

hmm so if i run it at a bar it not safe then?

i've been running a bar on a t25 for a few months now! u can really feal it struggle after bout 4500rpm in 3rd 4th and 5th like it desperatly needs more petrol:eek: ! would knock it down to bout 12psi if i could but it seems like thats the lowest the actuator will let me! oh and think it might die soon :( ! got 2 spare engines so who cares:1la

well this was the problem i thought i would encounter soooooo im gettin a cold injecter from a scrapys n weldin it to my boost pipe on the inlet and using a pressure switch set to 8psi to actervate it hents after 8psi it will inject extra fuel solving that problem :D

5th injectors suuuuuuuck fancy trying out a chip for bigger (s13) injectors? you'll have to check your ECU is the right type by opening it up and showing me a picture

hmm maybe yer!!!
all you need is a picture of my ecu internals?

sorry to say nots13 the silvia is very dead......... she went well tho..... screaming to the end......... rad went then got replaced then boost killed it :( and there was that much rust underneithe it wen i stripped it down

the early ECU can't be chipped (well not easily anyway), the later one can, I need to have a look to see what type you have :)

bear in mind this would be an experiment and would need the fueling checked out to make sure it's all ok

will it be reversable? ie if it dont work rite we can put it back? i know mine is a later model but ill take a few pics of the ecu for ya
my msn is [email protected] add me and we can have a talk!

it will be reversible :) I can just write a standard map onto a chip

I have an ECU here all socketed with the original chip nicely removed so it can be swapped back

so do I, was going to suggest a swap if he has the right one Mart ;)

ok ill get it apart one day this week!! the chip will enable me to use s13 injecters right? has anyway found away to make them fit?