S12OC UK Forum

S12OC UK Forum (http://nissansilvia.co.uk//index.php)
-   S12 Discussion (http://nissansilvia.co.uk//forumdisplay.php?f=3)
-   -   S12 aftermarket wheel question. (http://nissansilvia.co.uk//showthread.php?t=2722)

Dazz 07-11-2007 19:05

S12 aftermarket wheel question.
 
i know the S12 pcd is 4x114 and et 35-42, but will 4x114.3 wheels fit, as i know where a cheap set of the Integra Type-R enkies but im not sure iff the .3 makes much difference.:confused:
Dazz

bigtim 07-11-2007 19:27

s12's are 114.3 are they not

RichardK 07-11-2007 19:45

Yes, S12 wheels are 114.3 :)

PukkaSilvia 07-11-2007 19:49

114.3 they are

Dazz 07-11-2007 19:54

:confused: So why the difference between 114 and 114.3, as i have a set of rota's on mine and they are 114.:eek:

s13eater 07-11-2007 20:23

114.3;)

zxocmars 07-11-2007 21:04

Basic it's the translation from imperial to metric

Size is 4 * 4.5 inch, = 4 * 114.3 mm

Size just gets abbreviated to 114 :)

30psi 07-11-2007 22:22

But there are also a true 114.00mm PCD wheels as well and these have led to issues with stress on the studs

mr_turbo 08-11-2007 07:39

im using a 4/114 on mine fit fine it only 0.3mm there is no problem fittiong either.
if you intrested in a different set off wheels check out my work www.alloywheels.com cheapest place for wheels and tyres in uk!!!;)
also will sort out mebers on here even cheaper:cool:

Oscar 08-11-2007 16:28

so honda 4 stud rims fit.......... :cool: hmm me has a plan :)

zxocmars 08-11-2007 19:57

Quote:

Originally Posted by 30psi (Post 21527)
But there are also a true 114.00mm PCD wheels as well

Ahh, I wasn't aware of that, thanks for the info.

KillyBamp 10-11-2007 16:37

I think the centre bore is different on honda wheels tho, I don't remember if its bigger or smaller- if it's bigger then you can use spigot rings but if they are smaller you are looking at machining them out, and that will cost you.

old-and-rusty 11-11-2007 11:22

Pukkasilvia, told me before that Hyundai Coupe wheels will fit the s12.
I have a `98 Hyundai Coupe myself, but to be honest, I`ve never tried the wheels on my silvia.
Might be worthwhile, looking out for aftermarket Hyundai wheels too :D .
Regards,
Ian.

Dazz 11-11-2007 17:17

Just so you all know, ive just offered a enkie alloy from a jdm 4 stud integra, and it fits fine, need some spiggots but the offset is spot on.:D

Oscar 15-11-2007 14:35

awsome a mate of mine is offering me some very cheap teg rims,.......... just gota find some spigots now, any suggestions?

mr_turbo 15-11-2007 18:15

Hyundai Coupe wheels do fit i got some this week to use as drift wheels!

we sell spigot rings at work depending on the centre bore of the wheel i can sort them out for you!when i said honda wheels would fit i meant aftermarket wheels fitted to hondas sorry my bad lol!

KillyBamp 16-11-2007 14:41

Quote:

Originally Posted by morkai (Post 21698)
awsome a mate of mine is offering me some very cheap teg rims,.......... just gota find some spigots now, any suggestions?


Ebay


All times are GMT. The time now is 09:44.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.