s13 inlet
 

i was speaking to someone today who said the s13 inlet manifold will fit on the s12 quite easilly! is he right coz i've got one and it would save all the trouble of swapping injectors and throtle body!

nope.

Easy if your good at Aluminium welding and have a fair bit of time.as you need to weld the s12's inlet runners and flange to the det plenum.

Much easier answer:p

well i've gotta spare s12 manifold and an s13 one so if any1 could send me a pic off one thats been done i'll ask my mate how much it'll cost to weld it all up!

Mine:
http://img.photobucket.com/albums/v210/30psi/inlet2.jpg
http://img.photobucket.com/albums/v2...i/studless.jpg
http://img.photobucket.com/albums/v210/30psi/inlet1.jpg

Some other one I found on Goodle years ago:
http://img.photobucket.com/albums/v210/30psi/det2.jpg
http://img.photobucket.com/albums/v210/30psi/det1.jpg

you can bolt the s13 TB onto the s12 manifold tho, as its a bit bigger, you will need to take the manifold off and file it out a bit tho to make it match

cheers 4 that can't really see where it's been welded but will show him and see wot he says! do the wiring plugs match up to the s13 ones coz haven't got the loom? its out of a g reg 200

Crazy little exhaust manifold on that last picture Martin. cowboy but interesting

Ok I now have a DET plenum and an ET plenum here side by side.

Where the hell would I cut them IF i did go this route?!