The ballcock control arm can be bent to adjust the float level. I havn't needed to do this as my pumps pickup sat exactly at the same height as the standard s12 pump. I will road test it and if needed (i doubt it) bend the control arm.
The walbro was not as thick in diameter as the std pump as i managed to trim one standard pump rubber spacer and insert it inside the other before sliding it over the walbro.I did not have to bend my cradle about to get it in
__________________
Quote:
Originally Posted by s13eater
i wished my cams cost only £130 each, i must have c*nt wrote on my head  |
www.chaileygarage.co.uk
|