|
|
|
|
#1
01-12-2006, 08:48
|
||||
|
||||
yep chopped the flange off, flipped the bottom mount 180degrees and becomes top mount but at the front of the block rather than rear (needs to be front to fit the scimitar chassis).
Crouchie b had them cut by a place in my home town, had three cut, £45 ea. they are stainless steel and were plasma cut, 15mm thick to allow for warping when welding and then skimmed back to 10-12mm or so. a mate of mine Cameron has done better CAD drawings of the flange so they fit in one piece as crouchies need the runners cut in half to fit. If you want to get one done, i can get the CAD drawings off Cam and you can get one cut? 
|
|
#3
01-12-2006, 12:58
|
|||
|
|||
|
Quote:
I'm already looking at getting a batch made so if you're serious I'll get you one. I need to get 10 done really though or cost might not be nice
|
|
#5
01-12-2006, 13:50
|
||||
|
||||
|
as mentioned, they were £45 each before from the place we used (i have the companies details somewhere). I suspect Sideways Danny is using somewhere else if they need them done in 10s. if it doesnt work out, give me a shout
 be worth having them plasma cut tho, as its really accurate and needs little tidying. Flame cuts not much cheaper but you have to bugger about with the file. 
|
|
#6
01-12-2006, 17:32
|
|||
|
|||
|
the ones I will get are going to be CNC milled or laser cut (got 2 places I'm going to try I want to get them down to £30. I might do it different and have them as 2 pieces so I can just get 20 of one smaller type rather than a single piece flange. I need some confirmed interest though
|
|
#7
01-12-2006, 19:47
|
||||
|
||||
|
Sounds and looks pretty good to me. You need one adz. lol and an external wastegate
__________________
 Quote:
|
 |
|
|
Hybrid Mode
