2 pin clip, what is it?

[sparkey]

ok, i got 4 injector plugs ( 2 pin ), i got a sensor on the side of the throttle body,another sensor mounted on the inlet manifold ( i think, also a 2 pin ) there is a 3 pin plug between piston 2 and 3 that is not used, there is a grey multiplug which is used, there is 4 grounding pionts for the injectors, and then this lonely connector that is roughly in the same position as the 3 pin that is between piston 2 and 3.

this wire was connected but had frayed, and i followed the wire to which it is connected and it lead me to just above the starter solenoid and just below the inlet manifold.

[sparkey]

sorry adz, yeah, it is the same plug type as the injectors, and i is positioned on the loom between piston 2/3.

[wacomuk]

there is an unused plug there, cant remember if its for the Auto or air con

nothing will happen if the det sensor is disconnected as long as it doesn't earth out, if it does it will retard the timing by 5 deg

[adzs12]

im getting confused by this already, can you take a picture mate and post it up? thatll help no end