MAF sensor's voltage curve

Silvia_en_Frank · #1 30-01-2007, 21:23

Hi,

Does anybody have some specs of the S12/ CA18ET MAF. I mean the MAF sensor's voltage curve?

Thanks in advance, Frank

sideways danny · #2 31-01-2007, 00:03

it's the same as the CA18DET if you have the details for that. I have the details as part of mapping software but no point me putting it here if you have the same software

30psi · #3 31-01-2007, 00:43

The service manual explains the actual voltage output from the AFM.

Silvia_en_Frank · #4 01-02-2007, 22:53

Hi,

I don't have a manual yet. I ordered a cd, but no response sofare. If you have the numbers, I will be very please.

Thanks in advance, Frank.

umpkin · #5 02-02-2007, 00:16

sideways danny · #6 02-02-2007, 12:46

if you download live edit, the VQ maps are included. there's a few other programs with CA afm voltage curves included too

NOTE this is not for fault checks, it's the flow/voltage table for the afm so the ECU can relate the voltage to the fuel and ignition maps

Silvia_en_Frank · #7 02-02-2007, 18:29

Thank you umpkin.

Sideways danny, I don't understand what you mean with downloading live edit. Perhaps becourse I'm dutch and blond ;-) And my english stinks

But what the hack... as long as we understand each other...

I very much appriciate you help. Thank you, Frank.

Is there a picture in with a can see the connector pin-out on the eccs in this forum?