|
|
|
|
#1
01-02-2007, 22:19
|
||||
|
||||
you could use a throttle position sensor from a 200sx as its potentiometer
you would need some sort of crank sensor (toothed wheel off the bottom pulley?) does the megga squirt use coil packs? if not some modding of the dizzy would have to be done does the MS use the MAS sensor or MAP sensor? surly the MAP sensor is the way to go cant see why it wouldn't work
__________________
http://insightbookingsolutions.co.uk Last edited by wacomuk; 01-02-2007 at 22:21. 
|
|
#2
01-02-2007, 22:27
|
|||
|
|||
|
look at VEMS for a much more complete solution
|
|
#3
02-02-2007, 17:38
|
||||
|
||||
|
Thanks for the advice boys.
I will have a look at Vems. I concidering using an EDIS-4 with toothwheel. I will have a look at the yunkjards soon. The potentiometer will be from a old audiomixer, placed in a waterproof housing. I will place a picture as it's finished. Low budget and homemade brew.  It will look awfull, but I don't care.CU, Frank.
__________________
 New in town !
|
 |
|
|
Hybrid Mode
