L.s.d.???

s13eater · #1 01-03-2007, 19:01

it has the groove already there, it just needs deepening to the same spec as the s13 one.

ChEsTeR · #2 19-03-2007, 20:28

Some update. S14a can not be used with s13 or s12 iner hafts. The groove on the inner shaft is bigger in diameter then the s13 or s12 so u have to use both inner s14 shafts along with inner joints and custome made halfshafts. I was a bit pised because of that.

30psi · #3 19-03-2007, 23:52

Thats weird, how much thicker is the shaft?

Duncan from Ireland used an S14 diff with no issues.

I guess if thats the case then you only have to get one shortened a few inches.

ChEsTeR · #4 20-03-2007, 08:57

s14a inner shafts are about 1-1.5 mm sthicker. When u put an s12 shaft it want even lock with the dif and u can turn it around frelly.

New update. today i saw a dif from s14 and its diferent then the one from s14a. The only diference is the groove diameter. The dif from s14 will fit s12 inner shafts thom s14a will not.

30psi · #5 20-03-2007, 17:42

Thats odd...

How many bolts do the CV joint housings have? 5 or 6?

ChEsTeR · #6 20-03-2007, 18:02

I have no idea. I dont have the inner shafts yet. Will heve them in some time.