|
|
|
|
#1
23-01-2006, 12:09
|
||||
|
||||
£30 is fine. Let me know...
Club-S12.org can be fine at times, although there cars are different in some ways. I sold RichardK his SAFC. I have an instruction manual for it and could suggest the settings for you. What version of it do you have? You want any adjustable regulator that isn't a rising rate. Althoughtreally you'd be find on standard pressure with the larger injectors and SAFC. A walbro can be got for pretty cheap. SXOC is bound to have a 2nd hand one available.
__________________
 
|
|
#2
23-01-2006, 13:43
|
|||
|
|||
|
I should be able to let you know as soon as I know its going to pass its MOT with nill problems. I have the SAFC II
I put a wanted ad up for the parts I have spoken about. Now im off to honda to get more parts for my other cars, this shit never ends!
|
|
#3
23-01-2006, 14:51
|
||||
|
||||
|
Here is a link to the safc-2 wiring quide
 http://www.club-s12.org/board/showth...highlight=safc You pm via this site mate not through msn. I sent you one about the springs so open it and click reply
__________________
 Currently 226.4bhp@13psi with a remap to 18psi coming very soon
|
|
#4
24-01-2006, 07:48
|
|||
|
|||
|
Hi guys,
I got the car last night, it looked nice and drove well. Only problem was we spotted what appeared to be a gearbox oil leak and slightly worn bushes (specially on the right hand side). The rear suspension doesnt seem to be in good shape either, all in all its not a car I want to put a huge amount of money into as I have other projects on my plate at the mo but for someone who enjoys working on these cars im sure its no effort at all. My mate is going to put it through the MOT and see how it gets on, then I shall decide whether to keep it, sell it as is, or scrap it. I hope he looks at it today and decides its not too bad. The car is an F plate 1988 on 167kmiles with air con and CA18ET engine. If anyone is after any particular items please PM me and that shall give me an idea whether to break the car or not.
|
|
#6
24-01-2006, 12:38
|
|||
|
|||
|
Unfortunately its not black no but the bodywork is and there are some good panels.
Passenger side is perfect Drivers side is ok, there is a ding on the door that can probably be mended. The front wing has a big rust hole. The interior I recall being a browny/grey but in good condition. Its got the Lattice effect alloys and budget tyres attached. Bumpers are good Spoiler is perished and seal on the boot hatch, although good glass. Plastic parts off the interior are light browny grey also. If its been MOT'ed today I should have an answer by 4/5ish as to whether its being broken or not, I'll probably put an advert on ebay also.
|
|
#7
25-01-2006, 11:47
|
|||
|
|||
|
Ok so my motoring mind has been all over the place since buying this car but I think im finally settled on a decision to keep the car as it sailed through its MOT
 All I need to get it a rear drivers side brake caliper as it was sticking ever so slightly and they knew the way I'd be driving the car it was best to warn me. So rather than selling parts I am now after buying parts, in particlular the drivers side rear brake caliper for the moment. Does anyone have one they can post down to me? Please PM me, i'll place a wanted ad in the classified section. thanks
|
 |
|
|
fj20/et a replacement for displacement 
Hybrid Mode
