![]() |
|
#1
|
||||
|
||||
![]()
Just change it for a different one its a 15 minute job tops.
__________________
![]() Currently 226.4bhp@13psi with a remap to 18psi coming very soon ![]() |
#2
|
||||
|
||||
![]()
Even though its clicking it isnt travelling the full distance due to the gunge inside the cylinder.
Mine clicked, i cleaned it and it worked.
__________________
![]() |
#3
|
|||
|
|||
![]()
30PSI speaks the truth.
Mine started clicking on the recent bank holiday friday. * took it off - found it an arse to get to, could probably do it a bit easier now I have located the two bolts. * took it apart (dont take the c clip of the main shaft like i did ![]() * put it back together after cleaning with WD40 and then luubing with a tiny amount of copper grease. * works fine now ![]() cost of new starter saved = £120 or if you go to Halfords £283! |
![]() |
|
|