Help to choose my starter

[northerner]

or get one for an S13 like others have done which are lighter!

[30psi]

Still hurts when you drop them on your feet though lol.

All the time I've been in France I've never seen a single S-chassis car so can only imagine getting parts is near on impossible.

[alundra]

Ok,

With your advices, remove the starter was easy, thanks!

Some pics:







I saw some new/reconditioned starter, in France, but:

-they have a "cover" on gear area: http://www.altdiscount.com/affichear...mmat=0&moteur=

According too me this fit: http://www.altdiscount.com/affichear...mmat=0&moteur=

I found this site too: http://www.woodauto.com/Unit.aspx?Ma...I&Ref=S114322A

[alundra]

Can a 1 kilowatt model fit on mine? What is the cover on th e gear, like a cap?

[30psi]

Just clean the solenoid

[alundra]

Ok, some news...

It seems it isn't the starter, test mine and an another.
I tested many relays (specialy gray relay near battery, controlled for ignition right?).
battery charged and tested

Ok, let me explain my troubles:

2 wires fits on the starter: one black/yellow little size ordered by ignition, one black/red normal size which go to the battery.

When the plugs are on the starter (metal shield of starter on a ground of the car), when i join together the 2 wires said upper, by an external wire, starter work perfectly (gear exit and turn), but when i turn the key only nothing appear.

I know that my english isn't good, but in my mind it's the black/yellow wire that is in fault because the continuity of the "normal" wire exist, no doubt about it.

The solution i expect to install a start button relay (how many Amperes?) to command the ignition.

Do you have any hint or help about my starter trouble?

Cheers.

[30psi]

Yeah sounds like the starter signal wire at the back of the igntion barrel is at fault.

I would trace it back to there before thinking about adding a button