![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
sorry 2.5" straight through with center silencer side exit
__________________
![]() |
#2
|
||||
|
||||
![]()
Get a piper cam in there as well.
__________________
![]() |
#3
|
||||
|
||||
![]()
cant find one anywhere bud
__________________
![]() |
#4
|
||||
|
||||
![]()
Piper still do them iirc or alternatively use the Autosprint cam
__________________
Racing is life. Everything else, before and after, is just waiting. - Steve McQueen |
#5
|
||||
|
||||
![]()
i will be putting in a s1 uprated clutch to go with my s13 box
__________________
![]() |
#6
|
||||
|
||||
![]()
Piper still regrind them. You need to send them your old cam.
Some don't recommend the cam, but on my setup it was good. Max power at 6.1K, it was pretty manic at the top end.
__________________
![]() |
#7
|
||||
|
||||
![]()
The power you could expect would depend on who puts it together and sets it all up. 260hp would be about right on a spot on setup with good fueling but afc isnt the best and it still retains the afm. I expect that you will end up with about 245-250
edit im basing on you using the piper cam as its most beneficial with larger turbos
__________________
![]() Quote:
Last edited by PukkaSilvia; 14-05-2007 at 18:35. |
#8
|
||||
|
||||
![]()
Have you changed the clutch?
__________________
|
![]() |
|
|