Need more fuel!!!!!

[PukkaSilvia]

walbro 255 will fit in the s12 cradle easily. I wrote a how to in the 'how to section'
theres also info in the how to section on fueling . Put some s13 ca18det injectors in with a piggyback ecu

[s13eater]

aftermarket ecu's can be expensive if your looking for cheap mods, but are the best, the afm's are very restrictive, especially on an 8 valve, where breathing is bad to start with, i think they are about 54mm.

[umpkin]

i dunno how good this would be, just saw it on ebay.

same lph as a walbro, dunno how reliable they would be.

[sideways danny]

get some s13 injectors and i'll do an experimental chip

[mr_turbo]

i was told that s123 ones wouldnt fit?!? lol

i know a fiesta oil pressure switch comes on at 8psi which it slightly better ill have a look in the how to section then cheers guys

[s13eater]

having the ecu remapped would be much better, if danny will do it you, then i'd av that done, otherwise, for a quick job do the 5th injector, i'd get an ajustable pressure swith, demon tweeks should have one, i'd get it on a dyno and see where it goes lean, then have the injector come in just before that.

[blitz]

many moons ago HKS has PFC F-con and GCC programmed for S12 silvia and aftermarket ECU. if you're lucky you might be able to find them.

[sideways danny]

Originally Posted by mr_turbo

i was told that s123 ones wouldnt fit?!? lol

s13 injectors do fit, you just need to attach fuel hose to them. who said they didn't

As long as you have a late enough ECU with a 28pin EPROM chip its relatively easy to change most things

[Beany-s12]

i've got some s13 injectors you can have if danny's gonna try and chip it!
would do us all a big favour if he found a cheaper mod for the fuel