![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
yea the cheep controllers are seen as bleed valves and can be very prone to spiking in the boost and i ran one of the apex performance manual ones for i while and they come highly recomended. I would agree with you 30psi as to ditch off the t-piece. Every manual one i have seen only has 2 ports... in and out which you just put inline on the pipe that goes on to the actuator
|
#2
|
||||
|
||||
![]()
Best get it apart, if its a bleed valve then you will need the t piece, if its a ball and spring job it won't
__________________
![]() |
![]() |
|
|