Strange Lumpy idle.

[old-and-rusty]

Are you getting any fault codes showing on the ECU ?
I had a similar problem when I first re-built my ca18et, the throttle valve switch needed adjusting if I remember correctly.
Regards,
Ian.

[Dazz]

Originally Posted by old-and-rusty

Are you getting any fault codes showing on the ECU ?
I had a similar problem when I first re-built my ca18et, the throttle valve switch needed adjusting if I remember correctly.
Regards,
Ian.

Whats a fault code do then?

[zxocmars]

Originally Posted by Dazz

Whats a fault code do then?

Oh dear

When you run the "self-diagnostic" function on the ECU it will give you codes for any problems that it may be sensing?

Search the forums for "ecu diagnostic" and I'm sure you'll find the instructions

[Dazz]

I'll give that a try in the morning, thanks.

[old-and-rusty]

Originally Posted by Dazz

I'll give that a try in the morning, thanks.

Let us know how you get on with the self-diagnosis .
Regards,
Ian.

[30psi]

The ECU prob wont show any codes. I would start with some decent HT leads, a new dizzy cap and rotor arm, and check the CO2 emissions at an MOT station

[blitz]

it's your idle air regulator. mine does the same thing. it won't affect anything