|
|
|
|
#1
31-12-2007, 10:50
|
||||
|
||||
i normally get mine from pacet, ur rad i think had a 17" fan on it beforehand, however it will poke half an inch beyond the top and bottom, like the cowling that comes with it
 a 16" fan should secure nicely to the heater matrix http://rallynuts.com/motorsport/PACET_Fans_1844/ Last edited by Dr Silvia; 31-12-2007 at 11:41. 
|
|
#2
31-12-2007, 11:42
|
||||
|
||||
|
im using a cosworth twin fan set up from a 91 saffire cost me a £15 and about £10 for relay switch wire etc does the job brilliantly if temp at half way on idle switch on bout 30seconds it down to low temp
|
|
#3
31-12-2007, 13:27
|
||||
|
||||
|
Okay cheers just looking at a few now, ive got my eye on two rover 220 fans and a sierra one which is more expensive, but ill c how it goes.
|
|
#4
01-01-2008, 17:54
|
|||
|
|||
|
Get a twin fan setup from a primera which you could bodge to fit
__________________
     
|
|
#5
01-01-2008, 17:57
|
||||
|
||||
|
a single 12" fan is enough for the s12.
__________________
 Quote:
|
|
#6
01-01-2008, 18:22
|
||||
|
||||
|
To be honest it doesnt bother me which fan i go for as long as they fit and are cheap.
Using a single 12" would be better i think though just for ease of installation.
|
|
#7
09-01-2008, 20:52
|
|||
|
|||
|
__________________
|
 |
|
|
Hybrid Mode
